5-14-15

This is the voltage through an AC current at 1kHz.

Same circuit  5kHz.

Same circuit 500Hz.

This is the circuit that everything is being measured and the power source is being applied to. This is meant to be able to measure the impedance of the circuit so that a potentiometer can be used to apply a similar amount of impedance and the power can be maximized through the pot.

This chart shows the phase shifts between the voltage and the current. 

In this circuit the potentiometer is parallel in order to maximize the power across the potentiometer. 

This is the output of the circuit. Measuring the voltage as it fluctuates through the pot.